The unit is used to control the camera module in the UAV. It helps the pilot in the ground station to control the camera.
The “Hand Control Unit” is a panel-illuminated 7-button hardware that has been ergonomically developed to be used with the fingers of the left hand. It supports bidirectional RS-422 protocol as a communication interface, which can operate in the voltage range of 28V DC ±10%.
HCU is a system that provides the necessary commands with 7 push-pull buttons. The functions of the keys are determined by serigraphy on the panel.
Pressed and released information of 7 buttons is transmitted to the system via the RS-422 communication interface. FCP can test itself and periodically transmit critical faults via the communication interface.
• 7-button, designed for left-hand use in accordance with MIL-STD 1472F standards.
• It supports different key combinations.
• The panel illumination is switched on / off with the key combination.
• Communicates with bidirectional RS422 serial channel.
• Designed to meet current and anticipated future regulations.
• DC supply and RS422 connection are provided through a single circular connector.
• The top surface is replaceable for using different serigraphs.
• Temperature, Error Reports
• Power-on/power-off
• Pan and tilt (tilt only for M100–Series)
• Zoom
• Home position
• Capture and save the camera image
• Surveillance mode Data storage for other applications including
o Color palette
o Scene presets
o Reverse polarity
• Essential and Non-Essential Load Prioritizing
• RS422 Communication
• Nominal Supply Voltage: 28VDC
• 1W Power Consumption.
• Short Circuit, Reverse Voltage and High Voltage Protection
• 200gf 7 Keys
• Fischer Ultimate UR01W07 Circular Connector
• Red Panel Lighting
• Weight: 0.150kg
• Dimension (L x W x H) (mm): 107.2 x 41.5 x 154
• Ability to Operate in a Temperature Range of +5°C / +35°C
• Operating Altitude: 45,000ft
• MIL-STD-1472F
• MIL-STD-704F
TRL 9/9